| Section | Dimensions | sectional area | Mass | Moment of inertia | Modulus of Section | |||
| Width | Height | Thickness | Per pile | Wall | ||||
| W | H | t | ||||||
| mm | mm | mm | cm2/m | kg/m | kg/m2 | cm4/m | cm3/m | |
| PU 600 × 215 | 600 | 215.0 | 14.0 | 114.0 | 89.5 | 149.2 | 50376 | 2343 |
| PU 600 × 218 | 600 | 217.5 | 13.9 | 120.3 | 92.2 | 153.7 | 52420 | 2410 |
| PU 600 × 218 | 600 | 217.7 | 13.8 | 116.2 | 91.2 | 152.0 | 52763 | 2424 |
| PU 600 × 218 | 600 | 218.0 | 14.4 | 119.8 | 94.0 | 156.7 | 54771 | 2512 |
| PU 600 × 218 | 600 | 218.5 | 15.4 | 126.0 | 98.9 | 164.8 | 58118 | 2660 |
| PU 600 × 226 | 600 | 225.5 | 18.0 | 139.0 | 109.1 | 181.9 | 69300 | 3073 |
| PU 600 × 226 | 600 | 226.0 | 19.0 | 145.0 | 114.0 | 190.0 | 72320 | 3200 |
| PU 600 × 226 | 600 | 226.4 | 19.8 | 150.0 | 117.7 | 196.2 | 75618 | 3340 |
| PU 600 × 228 | 600 | 227.6 | 14.5 | 123.5 | 96.9 | 161.6 | 61468 | 2701 |
| PU 600 × 228 | 600 | 228 | 15.8 | 123.7 | 97.1 | 161.8 | 61560 | 2700 |
| PU 600 × 228 | 600 | 228.0 | 15.3 | 128.4 | 100.8 | 168.0 | 64375 | 2823 |
| PU 600 × 228 | 600 | 228.5 | 16.3 | 134.6 | 105.7 | 176.1 | 68010 | 2976 |
| PU 700 × 200 | 700 | 200 | 9.0 | 84 | 65.1 | 93 | 23000 | 1150 |
| PU 700 × 200 | 700 | 200 | 10.0 | 96.3 | 75.6 | 108 | 26800 | 1340 |
| PU 700 × 220 | 700 | 220 | 9.7 | 98.6 | 77.4 | 110.6 | 33770 | 1535 |
| PU 750 × 205a | 750 | 204 | 10.0 | 99.2 | 77.9 | 103.8 | 28710 | 1410 |
| PU 750 × 205b | 750 | 205.5 | 11.5 | 109.9 | 86.3 | 115.0 | 32850 | 1600 |
| PU 750 × 205c | 750 | 206 | 12.0 | 113.4 | 89.0 | 118.7 | 34270 | 1665 |
| PU 750 × 220a | 750 | 220.5 | 10.5 | 112.7 | 88.5 | 118.0 | 39300 | 1780 |
| PU 750 × 220b | 750 | 222 | 12.0 | 123.4 | 96.9 | 129.2 | 44440 | 2000 |
| PU 750 × 220c | 750 | 222.5 | 12.5 | 127.0 | 99.7 | 132.9 | 46180 | 2075 |
| PU 750 × 225a | 750 | 223.5 | 13.0 | 130.1 | 102.1 | 136.1 | 50700 | 2270 |
| PU 750 × 225b | 750 | 225.0 | 14.6 | 140.6 | 110.4 | 147.2 | 56301 | 2502 |
| PU 750 × 225c | 750 | 225.5 | 15.0 | 144.2 | 113.2 | 150.9 | 58140 | 2580 |
Tablestacas PU Este método, en el que cada tablestaca se hinca hasta su profundidad máxima antes de colocar la siguiente, es la forma más sencilla de hincar, pero se recomienda únicamente para suelos sueltos y pilotes cortos. Tablestaca de Acero laminadas en caliente El enclavamiento de avance libre está constantemente en peligro de desviarse. Para arenas densas y suelos cohesivos rígidos o en caso de posibles obstrucciones.
+86-18018031808 
+86-18018031808